Beyond features\u00a0WiFi transmitter<\/strong>\u00a0default, the\u00a0TP-Link WiFi Router Modem<\/strong>\u00a0more features\u00a0Repeater\u00a0<\/strong>it mean "Receive WiFi signal from another WiFi transmitter and then play it back\u201d<\/em><\/strong>.<\/p>\r\n\r\n\r\n\r\n

This feature is very useful in system design\u00a0WIFI network<\/strong>\u00a0indoors, because usually the indoor terrain is often complicated and has many obstacles, leading to the intensity and range of the radios\u00a0Router\u00a0<\/strong>greatly affected. The solution to this problem is usually of two kinds.<\/p>\r\n\r\n\r\n\r\n

Solution 1:<\/strong>\u00a0Buy a long range and powerful router like\u00a0TL-WR940N<\/strong>\u00a0or\u00a0TL-WR1043ND<\/strong>\u00a0or\u00a0TL-WR1042ND<\/strong>. But this solution is still not really optimal, because no matter how strong the device and how high the penetration after passing through the thick concrete layer of the 3 4-storey building, it is also weakened at points far from the Router.<\/p>\r\n\r\n\r\n\r\n

Solution 2:<\/strong>\u00a0Buy one CHEAPouter mid-range like TL-WR841N, TL-WR841ND<\/strong>, can take\u00a0TL-WR940N<\/strong>\u00a0As the main WiFi transmitter connected directly to the modem, Then buy weaker Routers like TL-WR740N, or get a strong TL-WR841N, place it in weak or hidden WiFi spots, receive the main Router's WiFi and broadcast back to that area. This solution in total cost is not higher than buying a powerful router and still ensures the same intensity and coverage throughout the building.<\/p>\r\n\r\n\r\n\r\n

\r\n
$\"S\u01a1$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Configure Repeat Wifi \u2013 Receive Wifi signal and play it back on Wifi Modem\u00a0TP-Link TL-WR841ND<\/strong><\/h3>\r\n\r\n\r\n
\r\n\r\n\r\n
\u00a0For each type of Router, each FirmWare usually has a different configuration. Here's how to configure it\u00a0TP-Link TL-WR841ND WiFi Router<\/strong>\u00a0repeat wave of Router TL-WR720N.<\/p>\r\n\r\n\r\n\r\n
Prepare:<\/strong>\u00a0You need a WiFi router TL-WR841ND, and a WiFi transmitter TL-WR720N (know SSID and password), a laptop.<\/p>\r\n\r\n\r\n\r\n
First you have to turn off your computer's WiFi, why do you have to, because the\u00a0TP-Link WiFi Router<\/strong>\u00a0usually has the default admin page IP address of 192.168.0.1. If you don't turn off WiFi and your Laptop is accessing\u00a0WiFi of TP-Link Router<\/strong>\u00a0otherwise, will lead to the case of IP conflict.<\/p>\r\n\r\n\r\n\r\n
Step 1:\u00a0<\/strong>Connect the router to the computer<\/em><\/strong>. Use the LAN cable to plug into the upper LAN port\u00a0wireless router\u00a0<\/em>TL-WR841ND (yellow port) and the other end plugs into Laptop. Open a web browser (Chrome, Firefox, IE) type in the address bar\u00a0192.168.0.1\u00a0<\/strong>You will see the Router's admin page\u00a0TL-WR841ND.<\/strong><\/p>\r\n\r\n\r\n\r\n
Note:\u00a0<\/strong>You can access the address\u00a0192.168.0.1\u00a0<\/strong>without plugging in a LAN connection cable\u00a0if you have connected Wifi playing from that Modem<\/strong>.<\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Username and password are\u00a0admin\/admin<\/strong>.<\/p>\r\n\r\n\r\n\r\n
Step 2:\u00a0<\/strong>Turn on WDS mode to repeater wave<\/strong>. S<\/em>After successful login you will be redirected to your admin page\u00a0Routers.\u00a0<\/strong>Continue to select the menu Wireless => Wireless settings. Scroll down below you will see checkbox\u00a0Enable WDS Bridging<\/strong>, click on it to display the WiFi selection frame to\u00a0Repeat.\u00a0<\/strong><\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Step 3:<\/strong>\u00a0Find WiFi waves for recording and playback<\/em>\u00a0Press\u00a0Survey<\/strong>\u00a0to search for all available WiFi waves and below are the results found.<\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
At the list of detectable WiFi, Find the SSID of the WiFi broadcast by\u00a0TL-WR720N<\/strong>, here SSID is\u00a0vitinhtringuyen.\u00a0<\/strong>Click connect to connect.<\/p>\r\n\r\n\r\n\r\n
Note:\u00a0<\/strong>You also notice the Chanel of the original Wifi above. vitinhtringuyen \u2013 Chanel is 1. Security is WPA2-PSK.<\/p>\r\n\r\n\r\n\r\n
The browser will return to the previous page for you to enter the password of the WiFi you want to repeat and then press\u00a0Save<\/strong>. Remember one thing you have to choose\u00a0Chanel\u00a0<\/strong>in the cell\u00a0Chanel<\/strong>\u00a0true to\u00a0Chanel\u00a0<\/strong>belong to\u00a0Routers transmit<\/em>\u00a0and select the correct password encryption type in the box\u00a0KeyType.\u00a0<\/strong>Many of you follow the steps correctly but forget this step and cannot repeat.\u00a0After entering the password<\/strong>\u00a0\u2013\u00a0Password<\/strong>\u00a0you have to\u00a0Reboot the Router<\/strong>\u00a0to save the changes.<\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Step 4:<\/strong>\u00a0Click Reboot to restart the Router<\/strong><\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Customize Connection<\/h3>\r\n\r\n\r\n
\r\n\r\n\r\n
\u00a0So you have finished repeating the wave\u00a0WiFi of TP-link TL-WR720N<\/strong>\u00a0and replay. But perhaps you will wonder, if so, now want to connect to your WiFi?\u00a0TP-Link TL-WR841ND Router<\/strong>\u00a0where to connect? There are 2 options.<\/p>\r\n\r\n\r\n\r\n
Method 1:<\/strong>\u00a0is to share the SSID of the source router ie the main router\u00a0TL-WR841ND<\/strong>\u00a0receive and replay. To do so you must disable DHCP in\u00a0Router TL-WR841ND<\/strong>. Thus, the 2 routers will share the same SSID. This way is very convenient because when moving, you do not have to reconnect. For example, you put your child\u00a0TL-WR720<\/strong>on the 1st floor. Con\u00a0TL-WR841ND<\/strong>\u00a0On the 2nd floor, it receives and replays on the 3rd floor. If you use 1 SSID, then when you bring your laptop or phone from the 3rd floor to the 1st floor, you will still connect as usual without having to disconnect from the network.\u00a0TL-WR841ND<\/strong>\u00a0to switch over\u00a0TL-WR720N<\/strong>.<\/p>\r\n\r\n\r\n\r\n
Method 2:<\/strong>\u00a0is to use 2 different SSIDs. To do so, you must enable the DHCP feature on\u00a0Router TL-WR841ND<\/strong>. And go to Wireless settings to configure the WiFi name as well as set a password for the second SSID.<\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Here I put it as\u00a0ViTinhTriNguyen841ND\u00a0<\/strong>to distinguish it from the main router's SSID. Next is to set up a password for this new SSID<\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
Finally, when you connect to WiFi on your computer, you will see 2 SSIDs. One of the main router and one of the\u00a0Router Repeater<\/strong>.<\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
For easy management, you should change the default IP of the configuration page\u00a0Router TL-WR841ND<\/strong>, because now both Routers have the same admin page IP192.168.0.1.\u00a0<\/strong><\/p>\r\n\r\n\r\n\r\n
\r\n
$\"H\u01b0\u1edbng$ <\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
You change it back to\u00a0192.168.0.10.\u00a0<\/strong>\u00a0So if you want to log in to the main Router's management page, type\u00a0192.168.0.1.\u00a0<\/strong>If you want to manage the TL-WR841ND, type\u00a0192.168.0.10.<\/strong><\/p>\r\n\r\n\r\n\r\n
Finally, unplug the lan cord that was originally plugged in and try to connect to\u00a0TP-Link TL-WR841ND WiFi Router<\/strong>\u00a0by WiFi.<\/p>","protected":false},"excerpt":{"rendered":"
In addition to the default WiFi transmitter feature, TP-Link WiFi Router Modems also have a Repeater feature ie "receiving WiFi signal from a single device.<\/p>","protected":false},"author":1,"featured_media":6774,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5,63],"tags":[],"class_list":["post-6603","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-software-hardware-news","category-tin-tuc"],"_links":{"self":[{"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/posts\/6603","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/comments?post=6603"}],"version-history":[{"count":2,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/posts\/6603\/revisions"}],"predecessor-version":[{"id":6775,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/posts\/6603\/revisions\/6775"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/media\/6774"}],"wp:attachment":[{"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/media?parent=6603"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/categories?post=6603"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/hatranlt.com\/en\/wp-json\/wp\/v2\/tags?post=6603"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}